Towertalk
[Top] [All Lists]

Re: [TowerTalk] Anyone used POR-15? Rust inhibitor/fixer

To: "Russell Ellsworth" <russ@ellsworths.net>
Subject: Re: [TowerTalk] Anyone used POR-15? Rust inhibitor/fixer
From: <ersmar@comcast.net>
Date: Wed, 14 Feb 2007 09:53:26 -0500
List-post: <mailto:towertalk@contesting.com>
Russ:

     With a couple inches of SLEET on the ground and on the tower today, 
needless to say it'll be some time before I get to touching up the bit of 
rust on my tower.  But rest assured, I will report on the project in the 
spring.

     BTW - I bought the starter kit from these guys just so I could test the 
material without much $$ expenditure.  $24 seemed like a cheap enough 
gamble.

73 de
Gene Smar  AD3F


----- Original Message ----- 
From: "Russell Ellsworth" <russ@ellsworths.net>
To: <ersmar@comcast.net>
Cc: <towertalk@contesting.com>; <noid@baycrestfl.com>
Sent: Tuesday, February 13, 2007 8:05 PM
Subject: Re: [TowerTalk] Anyone used POR-15? Rust inhibitor/fixer


> Gene,
> I hope you will keep us informed on how well you think it works after
> you've had a chance to try it. It sounds too good to be true and my
> Daddy told me about that!! I also have a situation that could use this
> product if it works. It is the gearbox on my crankup. Thanks for being
> the "test bed"!!
> WA6CWV
> Russ in Boise
>
>
> On Feb 13, 2007, at 3:35 PM, <ersmar@comcast.net> wrote:
>
>> TT:
>>
>>      Yesterday I clicked on the web site Noid listed, below, and read
>> about
>> their Super Starter Kit.  Today the kit is on my shack desk.  Fast
>> shipping
>> indeed.
>>
>>      The kit consists of an 8 oz. bottle of Marine Clean surface
>> degreaser;
>> 8 oz bottle of Metal-Ready surface prep; one 4 oz. bottle of POR-15
>> Rust
>> Preventative Paint (I chose gray for use with concrete/my tower base):
>> latex
>> gloves; two paint brushes; and detailed instructions, whatever they
>> are.
>>
>>      The whole kit cost $24 including shipping from NJ.  FWIW.
>>
>> 73 de
>> Gene Smar  AD3F
>>
>>
>> ----- Original Message -----
>> From: "Noid Wilson" <noid@baycrestfl.com>
>> To: <towertalk@contesting.com>
>> Sent: Sunday, February 11, 2007 3:15 PM
>> Subject: [TowerTalk] Anyone used POR-15? Rust inhibitor/fixer
>>
>>
>>> I was reading on another forum about a product that STOPS rust on
>>> metal.  They mentioned it has been used on antenna and towers.
>>>
>>> The product is called POR-15.  www.por15.com
>>>
>>> There is a simple video that explains usage and prep.  Its about $140
>>> for a gallon with some prep materials.  It comes in different colors
>>> clear and gray included.
>>>
>>> Wanted to know if this would be a viable product to prevent rust on
>>> tower parts as well.  I live within a salty environment- Tampa.
>>>
>>> Thanks for any input or advice.
>>>
>>> Noid Wilson
>>>
>>>
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>