Where do I find those freqs? I've looked on google but haven't found any
good data that I can understand.
----- Original Message -----
From: "Jim Brown" <firstname.lastname@example.org>
Sent: Saturday, March 10, 2007 6:57 AM
Subject: Re: [TowerTalk] ferrite beads was...Re: [RFI] HIGH POWER and RFI...
> On Fri, 09 Mar 2007 10:41:03 -0600, Chuck Sudds wrote:
>>I have thought about encasing the Wi-Fi receiver in a metal box or
>>shielding it in some manner and using torrids on the CAT5 cable?
> I would start by listening for Ethernet birdies on the frequencies
> listed in my tutorial that are on the ham bands that bother the
> ethernet system, and adding ferrite chokes as described in the
> tutorial to suppress those birdies. Because antennas exhibit
> reciprocity (that is, they work the same for RX and TX), what you do
> to suppress those birdies will also suppress the Ethernet system
> receiving your transmitter.
> If you still have problems, THEN work on shielding the electronics,
> which is usually far more difficult to do effectively than adding
> the chokes.
> Jim Brown K9YC
> TowerTalk mailing list
TowerTalk mailing list