[Top] [All Lists]

Re: [TowerTalk] 4 Element Steppir and T2X

To: <>, <>
Subject: Re: [TowerTalk] 4 Element Steppir and T2X
From: "Tom McAlee" <>
Date: Mon, 12 Mar 2007 20:19:35 -0400
List-post: <>
I turn a 4 element SteppIR and an OptiBeam OB2-40 on the same mast with a 

It is a bit much for it.  Occasionally with very high winds that last for 
days (you're not far away Joe, you know what its like sometimes here!) the 
mast will slip inside the rotator.  I've heard from a reliable source that 
that's a first indicator that it may be loaded up too much.

It's been up for 2.5 years now and that's happened 4 times.

The original rotator started acting funky after about a year.  Sometimes it 
would stop in the middle of turn, other times it just refused to start at 
all, etc.  So, I replaced it last July and this time I've been more careful 
not to turn the antennas during very windy periods (I didn't know that that 
was something to be avoided with the T2X).

Other than two mast slippages, it has been fine ever since.  Then again, it 
hasn't been that long.  I sort of expect to have to replace it again in the 
not-to-distant future.  Unfortunately, I don't have many options for 
rotators given the size of the tower and how close it is to the thrust 
bearing plate.  Lesson learned the hard way :)

Tom, NI1N

----- Original Message ----- 
From: "Joe Giacobello" <>
To: <>
Sent: Monday, March 12, 2007 1:30 PM
Subject: [TowerTalk] 4 Element Steppir and T2X

> Is anyone turning a 4 element Steppir with a T2X?  If so, has
> performance been satisfactory.? Any problems in high winds, etc.?
> 73, Joe
> K2XX
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>