Perhaps I'm missing something but using a "phasing harness" with coax cut
for a electrical length (usually a 1/4 wave of 75 ohm coax on either side of
a "T") only works for a narrow band of frequencies. If you are using a wide
band power divider, then you can use two identical lengths of coax cut from
the same roll. It that case, the electrical length isn't a factor.
73 de Perry - K4PWO
----- Original Message -----
From: "Howard Klein" <email@example.com>
Sent: Sunday, March 18, 2007 9:15 AM
Subject: Re: [TowerTalk] TDR recommendations?
> First thank you to all for the responses. Perhaps I have this all wrong
> my plan was/is to phase two 4 el SteppIR's. I have the means to make the
> transmission lines electrically equal but thought if I could see the 2
> antenna traces superimposed I could adjust the elements from the shack on
> each band as needed. Does this make sense?
> Get a FREE Web site, company branded e-mail and more from Microsoft Office
> Live! http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/
> TowerTalk mailing list
TowerTalk mailing list