[Top] [All Lists]

Re: [TowerTalk] Ham IV rotor

Subject: Re: [TowerTalk] Ham IV rotor
Date: Sun, 25 Mar 2007 15:15:31 EDT
List-post: <>
In a message dated 3/25/2007 6:16:02 P.M. Greenwich Standard Time, writes:

My  indicator for the Ham IV rotor is not showing the correct direction 
now,  in fact, when I change the direction it sometimes does not 
continually  move, then it will jump a considerable degrees

Is there a problem with  the rotor or is the wiper arm in the rotor dirty?

It could be just dirty, or more likely, the resistor has some spots that  are 
not good.  Try cleaning and if it doesn't work, spring for a new  one.  
Replacing it is an easy job.

************************************** AOL now offers free email to everyone. 
 Find out more about what's free from AOL at

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>