[Top] [All Lists]

Re: [TowerTalk] C3E Move Sucessful; Need one Measurement

To: "'Mark Adams'" <>,<>
Subject: Re: [TowerTalk] C3E Move Sucessful; Need one Measurement
From: "Bill Parry" <BPARRY@RGV.RR.COM>
Date: Thu, 29 Mar 2007 22:40:42 -0500
List-post: <>
Howdy Mark,

I have the instruction manual in my hand and it says at the bottom of the

15 M Rear Driver tips have two adjustments available: 1 up and 1 down (std
center freq is appx 21.225). Each hole in/out adjusts the center frequency
125 kHz.

10 Mtr Front Driver tips have 4 adjustments available: 2 up and 2 down (std
center freq 28.800) each hole in/out adjusts center frequency appx 250 kHz.

If you would like, I can scan the page with the measurements and send it to
you for your future reference.

Bill, W5VX

>-----Original Message-----
>From: [mailto:towertalk-
>] On Behalf Of Mark Adams
>Sent: Thursday, March 29, 2007 8:11 PM
>Subject: [TowerTalk] C3E Move Sucessful; Need one Measurement
>Hi Gang,
>Thanks to all who provided me with instructions on moving a C3E from
>the home of a club SK to my place. In the end, I simply unbolted each
>element at the boom and slid them free. Then I placed the elements and
>boom on my extension ladder on the roof rack. It all got tied down and
>flagged. I took the backroads home. Some new hardware and its all ready
>to go up on my tower Saturday. I'm sure the DOT could have gotten me
>for over length, but they were all busy elsewhere!
>BUT, I have no instructions and an wondering if it is tuned for CW or
>SSB? Or maybe there is no difference on a Force 12 C3E. If someone can
>give me one measurement I can confirm what I've got.
>Thanks es 73,
>Mark K2QO
>TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>