I am trying to check the tension on my 100ft tower, which uses 3/8"
Polygon guy rod (guyed out at 100 ft). There is 5/16" EHS for the
last 15 feet or so.
I can easily use the Loos gauge to measure the tension, but I do not
know what the correct tension should be for Polygon guy rod. I
believe I should be at 10% breaking strength, but I don't know what
that is off-hand. Probably this has been discussed before, but I
can't find it.
73 - Scott KA9FOX
TowerTalk mailing list