In my "yout" I build a 6-element 15m yagi using a single section of 2" by 40
foot irrigation aluminum tubing I obtained at a local Agri-supplier. I used an
top truss to help support the ends. I didn't have any side trusses. I probably
got away with this configuration because a 15m element is relatively small and
there were no "freak" wind storms while I had it up on my 104 foot tower. It
worked real fine and lasted a long time. I ruled 15 meters in this area with
that antenna in the early 1970's!
Yes, tower sections have been used for booms, especially the monster 80 meter
yagi's. Google 80 meter yagi and I'm sure you will find some examples.
Your construction decisions will depend upon the band of interest and your
location's wind and ice loading circumstances. One of the bibles for guidance
is "Physical Design of Yagi Antennas" by David B. Leeson W6QHS (ISBN
0-87259-381-9). I bought my copy from the ARRL Bookstore years ago.
And I know both Texas Towers and the MFJ catalog have aluminum tubing for sale
in a wide variety of sizes and thickness.
73 de Bob - KØRC in MN
- - - - - - - - - - - - - - - - - - - -
Date: Mon, 11 Jun 2007 02:04:34 -0400
From: "JACK CAMPBELL" <email@example.com>
Subject: [TowerTalk] Where is the best place to buy aluminum tubing?
Content-Type: text/plain; charset="iso-8859-1"
Looking for some small 1"1/4 inside diameter to go on the bottom of some
spreaders and some 3" to 4" boom stuff
for some long booms.
Wonder how long of a boom can be made from 3" aluminum tubing. Looking at a
Wonder if anyone has played with small aluminum tower for a boom. Does anyone
make stuff smaller then 20G.
I guess aluminum irragation aluminum pipe could work, anyone tried that before.
Looking for some input.
TowerTalk mailing list