[Top] [All Lists]

Re: [TowerTalk] Tower Consult

To: "Dick, W1KSZ" <>,"TowerTalk" <>
Subject: Re: [TowerTalk] Tower Consult
From: "jeremy-ca" <>
Date: Sat, 16 Jun 2007 16:57:36 -0400
List-post: <>
Hey Dick, I beat you to retirement!

Ive been up a free standing Universal tower ONCE and I'll never do it again. 
As you know Ive been climbing since I was a teenager and as high as 650' but 
Ive never been as uncomfortable as that completely unstable Universal. Yeah, 
I hear its safe but it sure didnt feel it. Two people on one? 

Rohn 45 can very safely have guys at 40' intervals so only 2 sets would be 
required. My 180' is guyed at 4 places and the top 20' is in the clear for 
easier working.

Since you probably cleared Raytheon with enough to live fat and long have 
you considered a crank up/foldover US Tower?

You cant take it with you so splurge!


----- Original Message ----- 
From: "Dick, W1KSZ" <>
To: "TowerTalk" <>
Sent: Saturday, June 16, 2007 1:03 PM
Subject: [TowerTalk] Tower Consult

>I recently retired and am planning to re-locate to Tucson, AZ (from
> Lexington, MA). I am in the enviable position of rebuilding the shack
> and putting up a new antenna system.
> At present, I have narrowed the choice of towers to either 80' of
> Rohn 45 or an 80' Universal Aluminum Free-Standing tower.
> On top I am looking at a Tennadyne 8 or 10 el HF Log with a 6 Meter
> antenna above that (10' separation).
> The Rohn is the "classic" approach but the Universal is very inviting.
> First, no guys are required but it takes a lot more concrete in the base.
> Also, not sure how easy it would be for two guys to climb it to install
> the antennas.
> The Rohn, while adequate, has it's drawbacks. Namely three sets of Guys
> and three more concrete piers.
> I would appreciate comments on my "predicament" and suggestions are
> welcome.
> Thanks,
> 73, Dick, W1KSZ
> -- 
> 73, Dick, W1KSZ
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>