[Top] [All Lists]

[TowerTalk] YAESU G1000 ROTATOR

To: <>
Subject: [TowerTalk] YAESU G1000 ROTATOR
From: "BA7NQ Terry" <>
Date: Thu, 21 Jun 2007 07:59:33 +0800
List-post: <>
Hi OM,

MY yaesu G1000 ratator just have a problem, the indicator degree of
controller is unequal with the rotator degree.

When the rotator rotate from 0 degree to 90 degree, the indicator only show
from 0 to 60 degree, 
and continue rotate from 90 degree to 180 degree, the indicator only show
from 60 degree to 100 degree,
and continue roate from 180 degree to 450 degree, the indicator running
slowing... when the auto rotaor stop at 450 degree, the indicator just in
about 210 degree.

The G1000 can rotate from 0 degree to 450 degree, it works ok and can auto
stop in 0 degree and 450 degree, 
but the indicator just only show from 0 degree to about 210 degree...

Any idea is welcome... thank you very much.

73! de BA7NQ Terry


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>