I havent seen the legs of the tower to be honest, since I got out of the
hospital, my lawyer has it he sent it to a metal expert who told him that
the legs were rusted on the inside and therefore collapsed,
I have put up and taken down many towers over the yrs,
this one ( rohn 25 ) just buckled, and down she came, I dont remember
falling, just waking up sucking air,
the tower on top of me,
and the pain, Let me tell you the pain,.. I have been Combat wounded, But
the pain I felt from a broken body, That hurt !
for 25 days I was hospitalized, 14 days in intensive care, I had a blood
clot in my left lung, I am lucky to be alive,
----- Original Message -----
From: "kd4e" <email@example.com>
To: "Dan Cisson" <firstname.lastname@example.org>
Cc: "Richard Joey Fiero II W5TFW" <email@example.com>;
Sent: Tuesday, June 26, 2007 7:59 PM
Subject: Re: [TowerTalk] Tower ACCIDENT
> Dan & Joey,
> We do not have enough information yet.
> Joey is on the 6M list and many of the guys prayed
> and encouraged him through the early days following his
> Joey didn't post the insurance report, perhaps the
> missing variables are in there.
> I am guessing that the tower may have suffered some
> sort of internal rusting or some other damage prior to
> his work on it.
> The stress of the work at 100 feet and then removing
> the top sections may have stressed those weaknesses until
> they finally gave.
> There may also have been a change in weather, e.g.
> wind gusts, temperature, etc.
> Metal fatigue sometimes results in failures at odd
> moments and I am sure Joey is happy that tower failed
> when he was at 40 feet vs 100!
>> I found a couple of things you said that did not add up correctly,
>> it happened,, but seems it should not have. You said you had the tower
>> to the 40 ft. level...By the way, is the tower Rohn 25??
>> When the tower was fully up with the antennas and all the guy cables,
>> tower was at maximum load. Then you added your body weight, your gear to
>> take the tower down, and all the movement that comes with getting a
>> tri-bander down from 100 ft. That is theoretically when the tower shoud
>> collapsed. The only way I could see any different, is the bottom set of
>> wires created some pivot at the failure point. But if that tower was up
>> proper guy cables, with a minimum of 3/16 EHS, 3990 lb break strength,
>> guy should have never broke. I am sure sorry of your accident, I hope
>> what I
>> am describing, and what happened to you can foil another tower
>> sure feel it should not have happened....Best Wishes,, Good Luck to you,,
>> Dan Cisson N4GNR
> Thanks! & 73, doc, KD4E
> Personal: http://bibleseven.com/kd4e.html
> Ham QTH: http://bibleseven.com/steel/cjb-steelhouse-index.html
> TowerTalk mailing list
TowerTalk mailing list