The more I read the more I am beginning to agree with Bill.
I am not liking climbing this tower already and the tilt idea is sounding
better and better with every fresh slant on the "Tower
73 fer nw es gud DX,
QSL VIA: BUR, LotW, e-QSL
Old calls: WB5ZQU/WY5L/KH3-KE5CTY-N5IET
Member: CTDXCC, NTCC, STXDXCC
FISTS: # 12637, SKCC# 2369
10X# 37210, FP#-1141
SMIRK#-5177, RARS #-149
> -----Original Message-----
> From: email@example.com
> [mailto:firstname.lastname@example.org] On Behalf Of Bill Parry
> Sent: Thursday, June 28, 2007 10:12 PM
> To: 'merlin-7'; 'Dale Martin'; email@example.com
> Subject: Re: [TowerTalk] rohn question
> A friend of mine that worked on radars in the Houston area
> told me that he recommended the pier pin installation. He
> said that it helped remove the torque from the tower and put
> it on the guy wires. I really never had someone give me a
> scientific explanation but I decided to follow his advice.
> The tower company that put up my tower had no problems with
> the pier pin.
> Why would you bury an expensive piece of Rohn 25 in concrete
> (long or short
> version) when you can just order the Concrete Base with Pier
> Pin or the Hinged Base plate. When you take it down you don't
> need a hack saw!
> Bill, W5VX
> >-----Original Message-----
> >From: firstname.lastname@example.org [mailto:towertalk-
> >email@example.com] On Behalf Of merlin-7
> >Sent: Thursday, June 28, 2007 8:00 PM
> >To: Dale Martin; firstname.lastname@example.org
> >Subject: Re: [TowerTalk] rohn qusestion
> > You would not want to seal the ends....water in the tower needs a
> >place to drain to...sand or gravel at the bottom of the hole...
> >> And are the legs of the bury-able section sealed at the bottom?
> >> >
> >> > 5' feet and 6'8"
> >> >
> >> > Carl
> >> > KM1H
> TowerTalk mailing list
TowerTalk mailing list