Towertalk
[Top] [All Lists]

Re: [TowerTalk] new tower

To: "Paul Hemby" <phemby@hotmail.com>
Subject: Re: [TowerTalk] new tower
From: "Rick Karlquist" <richard@karlquist.com>
Reply-to: richard@karlquist.com
Date: Fri, 13 Jul 2007 15:15:52 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
Obvious solution is 4-way guying.  The use of 4 guys reduces the
80% rule to 57%, or 96 feet.  But 4 way guying also allows you
to put the guys out at 120 feet.  So you will be in very good
shape with 4 way guying.   Imagine the stability of a 3 legged
stool vs a 4 legged stool.  Big difference.

Rick N6RK


Paul Hemby wrote:
> I would like to install 170 feet of Rohn 45 tower.  The problem is that
> the
> specs call for guy points to be 136 feet.  My lot is only 170 feet wide
> which will give me about 96 feet on each guy point.  Is there anyway to
> elevate the guy points enough, such as using H beam to make this work, or
> increasing the size of the guy cables, pouring additional concrete, etc,
> the
> tower can be bracketed to the poured concrete bond beam on a concrete
> block
> garage at 10 feet if this would help.  Any help or ideas would be
> appreciated.   Thanks Paul WN4AMO
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>