I am using Rohn 45 Torque bars and having trouble attaching the guy wire to the
torque bar. I am using phillystran and using big grips. The big grips just goes
through the torque arm 1/2 inch hole and thire is no room for a thimble.
If I use a 3/8" Shackle they are rated only at 2,000 lbs. That dont seem
enough. The Phillystran is rated at 6,700 lbs.
What are your suggestions ?
Ron
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|