All:
I'm going to be building a Rohn 25G to sixty feet and I'm assembling the
parts. I'll need to guy the tower four ways (it's a Tilt Over) at two
levels. I'm looking at getting turnbuckles for the job and went over to
eBay to have a peek for some of the parts. There are some 5/8" turnbuckles
for about $12 with shipping. I'm thinking of getting the 5/8" ones because
they're a bit of overkill and lots cheaper than bust out retail. The link
to the turnbuckles:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=290016865124&ssPageN
ame=STRK:MEWA:IT&ih=019
Now I know I'm being cheap about this. But what is the down side? This
tower was sold to me used and the other owner had used 3/8" turnbuckles. So
the size is larger. I must be missing something.
Thanks in advance for your input.
Bill, AB8SC
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.10.22/922 - Release Date: 7/27/2007
6:08 AM
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|