[Top] [All Lists]

[TowerTalk] GAP Challenger Rebuild, Questions

To: "" <>
Subject: [TowerTalk] GAP Challenger Rebuild, Questions
From: Bill Gillenwater <>
Date: Tue, 11 Sep 2007 19:30:58 -0400
List-post: <>
I have a GAP Challenger that I am rebuilding. It appears to have all of 
the parts and pieces and I have the manual. I have two questions before 
I proceed with the coax wiring.

1.  The top section where the cap attaches to the coax. The cap had 
separated from the coax and the connectors were damaged. I assume the 
coax terminates into the cap. However, the pigtail coming off of the 
coax/cap, does that come from the shield of the coax or the center 

2.  The mid-section, where the coax exits and jumpers to the tuning 
bars. It appears that the shield is connected in two places, one exiting 
above and connecting to the lower tuning bars and one exiting below and 
connecting to the upper tuning bars.

Am I correct here??

thank you

Bill Gillenwater  K3SV

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>