Thanks Terry, sounds like an easy 'fix'....
On 10/4/07, Zivney, Terry L. <email@example.com> wrote:
> Ron Chambers (and friends)
> The easiest way to increase the voltage to your DC powered rotator is to
> install an outboard DC power supply in series with the negative lead from
> Orion controller. I used a cheap switcher (Samplex) that was gathering
> dust on
> the shelf. The extra 13 volts made the difference between not turning
> through 500
> feet of number 10 to the prop pitch to turning at normal velocity with the
> control set at "5" on the M2 controller.
> To reiterate, connect the positive lead from the external supply to the
> (common) lead at the M2 box; connect the negative (common) lead from the
> prop pitch motor to the negative terminal of the external power supply.
> Terry Zivney, N4TZ/9
> TowerTalk mailing list
TowerTalk mailing list