Andrew makes hoisting/hanging grips for LDF5 and LDF4. I found the LDF5
grips on ebay for a reasonable price.
Andrew also makes grounding kits for LDF5 and LDF4. I found them on ebay at
reasonable price as well.
Why not use the tools designed for the job?
73, Dick WC1M
> -----Original Message-----
> From: richard allen [mailto:email@example.com]
> Sent: Tuesday, October 16, 2007 6:51 PM
> To: firstname.lastname@example.org
> Subject: [TowerTalk] hanging Heliax
> I am about to install two runs of 7/8 Heliax (LDF5) and three of 1/2
> Heliax (LDF4) going up a 55 foot tower.
> Can I use hose clamps to secure the cable?
> Can I use lots of heavy plastic tie wraps (1/2" wide)?
> Can I use the hose clamps around the connector for grounding at the
> top or do I need to use the Andrews grounding kits?
> Any suggestions would be appreciated.
> Richard W5SXD
TowerTalk mailing list