Removal is easy. Just use a utility knife to put a slit in it lengthwise,
being careful not to cut deep enough to damage the cable. Then heat it a
little (I use a propane torch), and it will peel right off.
73, Tim N3XX
----- Original Message -----
From: "John Ammeter" <email@example.com>
Sent: Monday, October 29, 2007 11:39 AM
Subject: [TowerTalk] FLooded shrink tubing?? Can you remove it??
>I saw that Roger, K8RI, used heat shrink tubing with "sticky goo" inside
> for his coax connections. I've got a supply of that from my days at the
> local utility. We used it for PERMANENT underground splices.
> Has anyone (Roger??) had experience removing that heat shrink from a
> connection? I'm about to put up a tower with three antennas on it and
> was planning on using "coax-seal" but that heat shrink would be better
> but I've never had to remove it before.
> John KE7JGB
> TowerTalk mailing list
TowerTalk mailing list