[Top] [All Lists]

Re: [TowerTalk] Looking For LMR-400UF

Subject: Re: [TowerTalk] Looking For LMR-400UF
From: Mike <>
Date: Wed, 31 Oct 2007 09:25:50 -0400
List-post: <>
Eric - VE3GSI wrote:
> So can I assume you mean a loop from a hard-line feeder to the beam around a
> rotor?
> Now, I seem to remember reading that LMR-400 has a limited bend life. In
> fact, the LMR-400 I have on a roll is quite stiff. So I opted for Super 8,
> similar to the 9913 flex cable for my rotor jumpers from the Heliax to the
> beam. I am not trying to be critical of your statement, but did I overlook
> something in my research?
Yep. He asid LMR499UF. The UF on the end stands for UltraFlex.
Mike NF4L

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>