I have a general rule about NOT using solder on any exposed antenna
connections. The solder always seems to infiltrate (amalgamate) the copper
and the connection becomes brittle and breaks.
I use lugs with compression connections and rarely have failures.
----- Original Message -----
From: "Roger Cooke" <email@example.com>
Sent: Saturday, December 01, 2007 2:00 PM
Subject: [TowerTalk] Gamma fixing
> This is the third time I have lost my gamma wire on my 110ft tower! I
> have an
> 18 inch spreader clamped to the tower and another two spaced down the
> I fix an old piece of coax at the top and just feed it through insulators
> in the other
> two spreaders down to the bottom. The way I have fixed it is to solder the
> and inner together onto a large solder tag, a very large and solid one. I
> then fix
> this to the loop of the spreader at the top. The inherent problem is the
> weight of
> the coax, since it just hangs on that solder tag. The wind eventually
> causes it
> to fail and the gamma just falls away, quite annoying, since I have to
> climb the
> tower again and take 110ft of coax with me and fix it.
> I would like to hear of some variations on this theme so I can modify my
> fixing method! How do you do it?
> 73 de Roger, G3LDI
> Regards from Roger, G3LDI
> Swardeston, Norfolk.
> Sent from Yahoo! - the World's favourite mail.
> TowerTalk mailing list
TowerTalk mailing list