Is it ok to build parallel inverted L's for both 40m and 75m similar to
the method that you would build parallel dipoles?
I was thinking about using my tower as the support and running parallel
inverted L's which would be secured to the tower by pvc standoffs and
separated from each other by about 12 inches or so(less if workable).
The 1/4 wave 40m inverted L would actually be just a 1/4 wave vertical,
but the 75m would need to be in the L configuration for the last 10 feet
or so of the wire.
Would this work assuming that I had a decent radial system attached to
Your thoughts on this would be greatly appreciated.
The information contained in this transmission may contain privileged
and confidential information protected by federal and state privacy
laws. It is intended only for the use of the person(s) named above. If
you are not the intended recipient, you are hereby notified that any
review, dissemination, distribution or duplication of this communication
is strictly prohibited. If you are not the intended recipient, please
contact the sender by reply email and destroy all copies of the original
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.17.8/1196 - Release Date:
12/25/2007 12:18 PM
TowerTalk mailing list