#1 is absolutely correct, nay even critical. #2 has not been my experience
in 11 years with three different Yaesu rotators, all pinned.
73, Pete N4ZR
At 08:46 PM 12/26/2007, Blake Meinecke wrote:
>#1 Tighten the mast clamp EXACTLY LIKE the instructions say
>#2 Resist the urge to pin the mast to it!!!!
>Ignore #1 and you'll break the clamp.
>Ignore #2 and you'll end up with an aluminum housing full of thousands of
>little bits and pieces.
> > -----Original Message-----
> > From: firstname.lastname@example.org [mailto:towertalk-
> > email@example.com] On Behalf Of RICHARD SOLOMON
> > Sent: Wednesday, December 26, 2007 22:54
> > To: firstname.lastname@example.org; email@example.com
> > Subject: Re: [TowerTalk] Yaesu G800s Rotator
> > I am considering the YAESU G-2800DXA for my LM-470.
> > Am I making a mistake ??
> > 73, Dick, W1KSZ/7
>TowerTalk mailing list
TowerTalk mailing list