[Top] [All Lists]

[TowerTalk] Cutting tubing

To: (TowerTalk)
Subject: [TowerTalk] Cutting tubing
Date: Fri, 28 Dec 2007 19:38:46 +0000
List-post: <>
I have very good luck with any large  tubing of any kind and getting a square 
cut.  Just wrap a piece of paper (I use printer paper) around the tubing and 
align the edges that overlap.  I then tape the overlap and use a permanent 
marker to scribe a line along the edge.  Remove ofr slide the paper out of the 
way and cut the tubing while rotating and follow the line with the saw blade.  
Then dress the cut with a file to get rid of any burrs on the cut especially 
the inside.

Arne N7KA

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>