Towertalk
[Top] [All Lists]

Re: [TowerTalk] Polyphaser Failure Mode

To: "RICHARD SOLOMON" <w1ksz@q.com>,"TowerTalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Polyphaser Failure Mode
From: "Ed Williams" <sunset392@cox.net>
Date: Sun, 6 Jan 2008 22:39:42 -0500
List-post: <mailto:towertalk@contesting.com>
Hi Dick,

My research shows the following for that polyphaser

PPC-IS-B50-HU-C1        PolyPhaser Lightning Protector, UHF Female Connectors,
Bulkhead Mount, 500 W at VHF, 50-700MHz

I am not sure how much power you were applying but to is not designed for HF
and  that might be the problem.

73, de KN4KL

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of RICHARD SOLOMON
Sent: Sunday, January 06, 2008 8:28 PM
To: TowerTalk
Subject: [TowerTalk] Polyphaser Failure Mode


I installed a Polyphaser B50HU-C1 on the 80/40 Butternut HF-2V. It looks
like
it is now an open circuit. I'll verify that tomorrow when I got some
daylight.

Anyone experience that before ??

73, Dick, W1KSZ
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.17.13/1211 - Release Date: 1/6/2008
11:57 AM

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.17.13/1211 - Release Date: 1/6/2008
11:57 AM

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>