[Top] [All Lists]

Re: [TowerTalk] UT-8000 Cable Prep Tool

To: "'Larry Burke'" <>, <>
Subject: Re: [TowerTalk] UT-8000 Cable Prep Tool
From: "Dave Harmon" <>
Date: Tue, 11 Mar 2008 09:04:44 -0500
List-post: <">>
The UT-8000 doesn't work on LMR-400 but you can go here and look around.

For those who are thinking about getting a UT-8000 for RG-213, RG-8, Davis
RF Bury-Flex and other .405 o/d coax.....the UT-8000 is definitely worth the
$39 from DX Engineering.
This thing gets it right every time and I prepped the first coax in less
than 30 seconds.
After that, it was a lot quicker and perfect too.

Never use a knife of any kind.....
Been there, done that...and it ain't worth a damn.


Dave Harmon
Sperry, Ok.

-----Original Message-----
[] On Behalf Of Larry Burke
Sent: Monday, March 10, 2008 10:45 PM
Subject: [TowerTalk] UT-8000 Cable Prep Tool

Does the Cablematic UT-8000 cable prep tool work on LMR400 cable? It's
billed as working on RG-8/U and 213/U, but no mention of anything else. If
not, is there a similar tool out there for LMR400 that is reasonably priced?

Larry Burke K5RK
Brazoria County Texas


TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>