[Top] [All Lists]

Re: [TowerTalk] Yaesu Connector for Controller End

Subject: Re: [TowerTalk] Yaesu Connector for Controller End
Date: Sat, 15 Mar 2008 21:35:17 EDT
List-post: <">>
In a message dated 3/15/2008 7:40:03 P.M. Eastern Daylight Time, writes:

Message:  3
Date: Sat, 15 Mar 2008 14:47:00 -0500
From: "res1q6fs"  <>
Subject: [TowerTalk] Yaesu G-800DXA Control  Box Cable Plug P/N.....
To: "towertalk"  <>
Message-ID:  <001c01c886d5$561f0a50$6400a8c0@RogersComputer>
Content-Type:  text/plain;    charset="iso-8859-1"

I have searched the  archives and found only the mention of the plug (maybe 
AMP/TYCO), but no  actual part number. I am going to call Yaesu Monday, but 
does anyone have the  P/N of the mating (plug) connector that goes on the cable 
inside the shack? It  is the white plastic plug. I am going to put in a much 
longer cable and do not  want to splice at this time. If I can, I'd rather 
from Mouser or Jameco  since I am ordering a bunch more stuff next week for 
another  project.


Roger W5RD
Murphy,  Texas

The Yaesu connector for the controller is Part #S8101130 and the pins for  it 
are Part #YP000205.  They are available at Burghardt Amateur  Center.  They 
are not expensive.  I'm not familiar with the OEM  source.

**************It's Tax Time! Get tips, forms, and advice on AOL Money & 
Finance.      (

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>