[Top] [All Lists]

[TowerTalk] A Couple Answers to Several Questions

To: <>
Subject: [TowerTalk] A Couple Answers to Several Questions
From: "Larry & Karen" <>
Date: Tue, 18 Mar 2008 12:35:54 -0500
List-post: <">>
As for getting the sections put together, if it's new sections you are dealing 
with then possibly the galvanizing is a bit thick around the female part, or 
the lower section. Just file it lightly, especially it seems around the bolt 
holes as this is where it will usually build up. If the tower has been together 
before it's also likely that the male and/or female parts are a bit out of 
round from the bolts being tight so just take a good size channel lock (water 
pump pliers) and squeeze them back to shape some.  They should go together 
snuggly but still fairly easily. 

Larry  K0IS

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] A Couple Answers to Several Questions, Larry & Karen <=