[Top] [All Lists]

[TowerTalk] FW: Aluminum Tubing

To: <>
Subject: [TowerTalk] FW: Aluminum Tubing
From: "Larry Burke" <>
Date: Fri, 21 Mar 2008 17:31:49 -0500
List-post: <">>
I should have been more specific.. The new tube never even makes it to the
rivet holes. It doesn't go in at all. Not even 1/16". 

Larry K5RK

> ______________________________________________ 
> From:         Larry Burke [] 
> Sent: Friday, March 21, 2008 4:45 PM
> To:   ''
> Subject:      Aluminum Tubing
> I ordered replacement element tips for a current production Force 12 Yagi.
> They appear to be the same size as the old ones, but they do not go into
> the mating part of the element without pounding. Since I want to be able
> to adjust and remove these at some point is there a trick for getting them
> to slide in without resorting to heating or slicing the larger tubing? 
> I have tried the obvious -- calling Force 12 -- but they are either closed
> for Good Friday or are not answering the phone. 
> Larry K5RK

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] FW: Aluminum Tubing, Larry Burke <=