[Top] [All Lists]

[TowerTalk] Yaesu Rotator Help

Subject: [TowerTalk] Yaesu Rotator Help
From: Tony <>
Date: Thu, 27 Mar 2008 21:58:10 -0400
List-post: <">>

Accidentally pulled out 3 wires from the control box on my Yaesu 
G-1000DXA rotator while rearranging the shack. The wires were connected 
to pins 4, 5 and 6. I reconnected the wires to what I thought was the 
order they came apart, but the rotator does not spin.

I tried different combinations with the three detached wires and I'm now 
wondering if I could have shorted something. It was working fine before 
this happend and a continuity test says the connector is fine.

If there is a problem, would it be at the rotator or at the control box?



TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>