[Top] [All Lists]

Re: [TowerTalk] Yaesu Rotator Help

Subject: Re: [TowerTalk] Yaesu Rotator Help
Date: Sat, 29 Mar 2008 10:01:03 EDT
List-post: <">>
Hi Tony,
I am sorry if I was confusing as to the voltage the control unit  spits out. 
The 10 - 12 volts is at the slowest rotational speed. If you turn the  speed 
knob clockwise, the voltage will approach 24 volts.
In any event, the 24 volts is supplied from a 26 VAC  transformer THROUGH A 
FUSE, to a bridge rectifier (a tab type), and then is  variably regulated 
(which makes up part of the speed control  circuitry).
If you do not have any voltage at pins 4 & 5 when pressing a  LEFT or RIGHT 
button, open the box and check that fuse. It is mounted on the  board that has 
the motor reversing relay (PB2, PS-Unit). Perhaps it is  open.

**************Create a Home Theater Like the Pros. Watch the video on AOL 

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>