I second Steve's motion: I use two of his tool bags, one on each hip. Also
use the large and small canvas buckets from Champion for hauling tools and
equipment up the tower. Sometimes I clip the small bucket to my belt when
carrying something relatively light that's too large for the tool bags. I
have an adjustable nylon lanyard from Champion, but don't know if Steve
sells that one anymore. I think some people use a rope decender with a
fixed-length rope lanyard for that purpose.
I like Petzl harnesses. Very light and comfortable, though a bit pricey. I
also like their rescue helmets. I wouldn't do tower work without a helment
-- I've bumped my head into metal things, or had them bump into my head,
Also essential to have a rugged but comfortable pair of steel-shank boots.
Your feet can really start to ache from standing on tower rungs for long
period of time if your boots aren't stiff enough. A good pair of
snug-fitting gloves is essential, too. You should be able to do just about
any task without removing the gloves (well, maybe execept handling small
screws and nuts.)
Unless it's absolutely deathly hot, I wear a comfortable long-sleeve shirt.
Less wear and tear on the skin when hugging the tower. I always wear jeans
(not too tight.) Never wear shorts.
I carry either a cell phone or miniature 2m rig whenever I climb.
One other essential piece of gear:sunblock. Use plenty on your face and
73, Dick WC1M
> -----Original Message-----
> From: K7LXC@aol.com [mailto:K7LXC@aol.com]
> Sent: Thursday, April 03, 2008 12:39 PM
> To: email@example.com; firstname.lastname@example.org
> Subject: Re: [TowerTalk] Full body harness
> In a message dated 4/3/2008 9:03:40 A.M. Pacific Daylight Time,
> email@example.com writes:
> > I am looking for recommendations for climbing harnesses with fall
> I have been climbing for years with good belts but that is all they
> belts. I have decided not to climb again until I have the proper
> harness and
> fall arrest equipment.
> > The conversation on this reflector has pointed me in the proper
> direction and now I am looking for personal experiences with the full
> harness and fall arrest. Things like fit, adjustability and weight I
> would think
> would be key elements of the harness (the safety features should be
> and ease of use.
> First of all, all fall arrest harnesses meet OSHA requirements so
> doesn't matter which brand you buy.
> You can spend from less than $100 up to a couple of hundred. If
> just going to use it occasionally, maybe one of the less expensive
> ones will
> suffice. The more expensive ones are generally more comfortable -
> basically what you're paying for - and more features. If you're
> spending 8 hours a
> day in it, it better be comfortable.
> Champion Radio Products _www.championradio.com_
> (http://www.championradio.com) has the more budget type which I use
> You'll need a fall arrest lanyard that attaches to the D-ring
> your shoulder blades and a positioning lanyard or two to hold you in
> position. These are more personal choice.
> But I don't know how people can climb and work on towers without
> a tool
> bag or two on their belt. I climb with 2 - one for parts and one for
> Champion has them under Rigging Gear.
> Cheers & GL,
> Steve K7LXC
> Champion Radio Products
> Cell: 206-890-4188
> **************Planning your summer road trip? Check out AOL Travel
TowerTalk mailing list