[Top] [All Lists]

Re: [TowerTalk] TOWER PERMIT

To: "'towertalk'" <>
Subject: Re: [TowerTalk] TOWER PERMIT
From: "Gary - N3JPU" <>
Date: Sun, 6 Apr 2008 08:56:28 -0400
List-post: <">>
Have you checked with US Towers if they can provide a wet stamped drawing
from a CO PE? Although it's not US Towers but when I bought my Heights Tower
last year they provided me with a Maryland PE stamped drawing.

Gary Mitchelson
N3JPU Montgomery Co. MD  FM19 

-----Original Message-----
Sent: Sunday, April 06, 2008 08:42
To: towertalk; K6YE
Subject: [TowerTalk] TOWER PERMIT

To All,

Sometime ago, on behalf of a friend, I requested information regarding tower
installation using drill hole/bolt installation. Rather than take that
approach, he wisely decided to core-cut the existing concrete, dig a proper
hole, insert rebar cage, and base.

He has applied to the city of Denver, Colorado for a permit and submitted
the documents supplied by US Towers for a TMM-531 tower. Since the
aforementioned specifications has a "California" stamp, the city of Denver
has refused to issue the permit. Has anyone experienced this situation
and/or what is the next step?

Thanks, in advance, for any assistance you may give.


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>