[Top] [All Lists]

Re: [TowerTalk] TOWER PERMIT

Subject: Re: [TowerTalk] TOWER PERMIT
From: "Scott MacKenzie" <>
Date: Sun, 6 Apr 2008 12:31:05 -0400
List-post: <">>
Spend the money and buy a stamp...At least on the East Coast there is
reciprocity for most stuff - but California doesn't accept other PE paper as
valid - so others do not consider California stamps valid.  This is for a
lot of reasons - they claim different focus on seismic issues, etc.  More
than likely it is just another government scam to increase the licensing

-----Original Message-----
Sent: Sunday, April 06, 2008 8:42 AM
To: towertalk; K6YE
Subject: [TowerTalk] TOWER PERMIT

To All,

Sometime ago, on behalf of a friend, I requested information regarding tower
installation using drill hole/bolt installation. Rather than take that
approach, he wisely decided to core-cut the existing concrete, dig a proper
hole, insert rebar cage, and base.

He has applied to the city of Denver, Colorado for a permit and submitted
the documents supplied by US Towers for a TMM-531 tower. Since the
aforementioned specifications has a "California" stamp, the city of Denver
has refused to issue the permit. Has anyone experienced this situation
and/or what is the next step?

Thanks, in advance, for any assistance you may give.

Semper Fi,

Tommy - K6YE
DX IS    

TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>