Kimberly Elmore wrote:
> It's severe storm time in the Southern plains and, while I've taken, and am
> still taking, steps to protect my shack from lightning damage, I began to
> I always disconnect all transmission and control lines from equipment, but
> what should I do with them after that? Should I make connectors so that I
> connect everything to the
Your best choice is to ground those cables where the enter the house at
the bulkhead panel which should be grounded. You definitely do not want
to let them float. Here the coax comes in through bulkhead connectors
in the grounded bulkhead where the Polyphasers are mounted. Normally I
do not have the option of disconnecting any equipment including
computers and network connections and all that interconnecting wire
makes a good inductive pickup.
http://www.rogerhalstead.com/ham_files/cablebox.htm Photo next to the
bottom and on the left hand side shows how I've been doing it although
the photo is badly outdated it still conveys the idea.
> station earth ground or should I let them float? Especially if I disconnect
> all *equipment* from earth ground, should I still connect all transmission
> and control lines that enter the shack to earth ground when I'm not operating?
> Kim Elmore N5OP
> TowerTalk mailing list
TowerTalk mailing list