Jim Lux wrote:
>
>I think a lot of the "old time" sort of switchgear used with open wire
>lines was sized for use open in the outdoors with dirt and crud
>accumulating, or was repurposed from equipment actually designed for
>things like AC power panelboards (where hot switching might be in the
>list of requirements.. ) both of which drive towards physically larger
>sizes. Think, if ham could have scrounged up a big old DP knifeswitch
>from a scrapped theater lighting or industrial panel board, especially
>if it was free, it would be a natural to use with open wire line.
>
There are still some "old time" open-frame RF relays available from
Eastern Europe, for example:
RF Relay: Open frame 2 position relays. Using a pair of these relays it
is possibly to build 5 bands switcher for Pi-circuit. It has neutral
position if it is tongue directed to down, I kW it is not a problem for
it. Russians call it "tongue of my mother-in-law" - $10
See http://www.nd2x.net/ur4ll.html
--
73 from Ian GM3SEK 'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.co.uk/g3sek
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|