Thanks for the ideas everyone.
I did take a look at the usual sources for things of this nature
(Mouser, DigiKey, Pomona, others) but turned up nothing. McMaster Carr
was a good idea (thanks) but still nothing.
Someone help me here . . . wouldn't the use of a pair of coax bulkhead
barrels introduce an impedance bump given the metallic outer surface of
Gary Schafer wrote:
> If you can't find the banana jacks you could always use 2 of the pl259
> barrel bulkhead type with all thread placed the proper distance apart. A
> banana plug will fit in them nicely.
> Gary K4FMX
>> -----Original Message-----
>> From: firstname.lastname@example.org [mailto:towertalk-
>> email@example.com] On Behalf Of Steve
>> Sent: Saturday, May 10, 2008 3:23 PM
>> To: TowerTalk
>> Subject: [TowerTalk] Banana jack feedthru
>> Anyone ever seen back-to-back banana jacks? Who makes them? Where can I
>> get them?
>> I'd like to terminate my open wire line on both sides of my plexiglass
>> window pane with a banana jack, hence my quest for a back-to-back jacks
>> that can screw together with the plexiglass between the halves.
>> A pair back-to-back banana jacks would allow me to unplug the OWL from
>> the inside when not in use and, on the outside, provide a "pull away"
>> mechanical fuse for those occasions when high winds or falling tree
>> branches stress the line.
>> Steve K8JQ
>> Read The Patriot It's Right -- It's Free
>> http://PatriotPost.US/subscribe/ Veritas vos Liberabit
>> TowerTalk mailing list
Read The Patriot It's Right -- It's Free
http://PatriotPost.US/subscribe/ Veritas vos Liberabit
TowerTalk mailing list