[Top] [All Lists]

Re: [TowerTalk] Square vs Round Holes

Subject: Re: [TowerTalk] Square vs Round Holes
Date: Mon, 12 May 2008 17:43:29 EDT
List-post: <">>
In a message dated 5/12/2008 2:12:49 P.M. Pacific Daylight Time, writes:

>  Also, what basis are you saying the hole would have to be  bigger?  I can 
provide (and have on here) drawing certified by PE and  state contractors that 
disagree with your assessment.  
    The basis is that the PE that calculated and  stamped the plans has 
designed the hole. In the case of making a change from a  square hole to a 
one, the hole would have to be re-calculated and  redesigned and the building 
permit amended. 
    If you're going to make sweeping engineering  statements, please back 
them up with real germane engineering rationale.  Tnx.
Steve    K7LXC
Professional tower services for hams
Cell; 206-890-4188


**************Wondering what's for Dinner Tonight? Get new twists on family 
favorites at AOL Food.      

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>