Towertalk
[Top] [All Lists]

Re: [TowerTalk] rebar grounding

To: "Ronald Anderson" <w9rma@charter.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] rebar grounding
From: "Artmouton" <k5fnq@cox.net>
Date: Mon, 19 May 2008 19:51:39 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Did not do mine for that reason and for the fact of not really being sure 
that the cement pour did not uninstall the link.  I Installed separate 
ground rods to the sides of the tower base with strap from tower to the 
ground rods (easily purchased at Lowe's)
Art K5FNQ

----- Original Message ----- 
From: "Ronald Anderson" <w9rma@charter.net>
To: <towertalk@contesting.com>
Sent: Monday, May 19, 2008 10:16 AM
Subject: [TowerTalk] rebar grounding


> Hi folks;
> I am about to pour 20 yards of concrete for my tower (SSV).  Now I have
> been told over the years not to ground my tower through the poured
> cement.  Well I have some folks who think I should ground the two
> rebar mats plus the tower to the rebar.  Of course what comes to mind
> is the splitting of the base if it ever took a major hit.
>
> I have always thought that his was a no-no and just ground the three
> legs of the tower in the usual way I always have buy using two ground
> rods on each leg and then tie all of the grounds together and then tie
> them into the main electrical ground of the house/hamshack.
>
> Your thoughts!
>
> Ron
>
> No virus found in this outgoing message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.23.21/1454 - Release Date: 
> 5/19/2008
> 7:44 AM
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>