[Top] [All Lists]

[TowerTalk] Orion Problem

Subject: [TowerTalk] Orion Problem
Date: Sat, 24 May 2008 16:01:11 +0000
List-post: <">>

Hard to tell what caused the problem. Sometimes noise on the wires going to the 
rotator can cause this kind of hiccup. I think you are OK as long as you 
program the display reading to match the actual position of the rotator (Mode 
1). I have had similar problems and I will rotate the antennas to true north 
and then program the diplay reading to 0DEG and all is fine from then on. There 
are mechanical limit switches to prevent any over-rotation so you don't have to 
worry about that.

John Owens - N7TK. 

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Orion Problem, jcowens1 <=