From: jim Jarvis <firstname.lastname@example.org>
Date: 2008/05/29 Thu AM 02:41:39 EDT
To: Erichardson@winnipeg.ca, email@example.com
Subject: Re: [TowerTalk] tower ground question
Remember, a 90 degree bend in a ground wire is an inductor, and you
want a low impedance
path for strike current. I would run that 1.5" strap from each
tower leg, with an 18" radius bend,
over the foundation, and out to each ground rod.
...i.e., attach the ground strap/wire higher up on each tower leg than just at
the concrete base.
Gene Smar AD3F
TowerTalk mailing list