[Top] [All Lists]

Re: [TowerTalk] new member with tower question

To: "Patrick J. Jankowiak" <>
Subject: Re: [TowerTalk] new member with tower question
From: Richards <>
Date: Thu, 29 May 2008 23:49:10 -0400
List-post: <">>
Yup - I agree.  They usually use an auger on a truck and then
the truck has a crane-type device to drop the pole into the hole.
I have just enough room for it to get into my back yard.
I plan a pole or two, PLUS a 50 foot Rohn 45G tower before I
am done.  That would give me a 10-40 M beam, a large loop at
45 feet up, and possibly some smaller 2 m sticks.

I have wife-permission for the 50 foot tower, but no permission to
drill any holes in the roof.   A limitation... but not a problem.\

I agree getting the pole truck back there might be the show

/////////////////////   Richards - K8JHR  ///////////////////

Patrick J. Jankowiak wrote:
> This has been suggested and is still under consideration. I have not 
> found the "pole guy" yet The access to the yard is limited to items 4 FT 
> wide, no crane possible, not sure how it could be tilted up into the 
> hole, I imagine they are very heavy.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>