[Top] [All Lists]

Re: [TowerTalk] Aluminum tarnish removal

To: "Towertalk" <>
Subject: Re: [TowerTalk] Aluminum tarnish removal
From: "Tom Osborne" <>
Date: Sun, 06 Jul 2008 17:38:01 -0700
List-post: <">>
Hi Jeff et al

Are you guys talking about SOS pads or steel wool?  SOS pads have a lot of 
soap in them that gets into everything.  Steel wool has no soap.  I have 
used steel wool here bofore and it works great.  73

> I'll second the SOS pads.  I know folks have raised concerns about
> leaving pieces of steel behind but it just doesn't happen in my
> experience.  Even old heavily oxidized pieces clean up very quickly.
> Rinse well and call it a day.
> As an experiment recently, I tried a spray cleaner intended for aluminum
> alloy wheels.  It's a product available at most any auto parts store.
> It contains some pretty harsh stuff: hydrofluoric acid, sulfuric acid,
> etc.  SOS pads are easier and provide better results.
> -Jeff
> On Sun, 2008-07-06 at 18:38 -0500, Larry WA9VRH wrote:
>> Hi Jamie,
>> I have had good luck with S.O.S. steel wool soap pads.  I know people get
>> freaked out about the steel part but I never found that to be an issue.
>> Cleaned up a couple of TA-33's and also a 40' Heights Aluminum towers. 
>> This
>> was a real mistake but once I started I had to finish as it looked so 
>> good I
>> had no choice!
>> 73 Larry WA9VRH


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>