Yes the SOS pads with the soap. I have found they work better than the plain
steel wool as they residue washes off easier.
I would recomend giving them a try. Worked good on a couple of TA-33's and
the Heights towers.
73 Larry WA9VRH
----- Original Message -----
From: "Tom Osborne" <firstname.lastname@example.org>
To: "Towertalk" <email@example.com>
Sent: Sunday, July 06, 2008 7:38 PM
Subject: Re: [TowerTalk] Aluminum tarnish removal
> Hi Jeff et al
> Are you guys talking about SOS pads or steel wool? SOS pads have a lot of
> soap in them that gets into everything. Steel wool has no soap. I have
> used steel wool here bofore and it works great. 73
> Tom W7WHY
>> I'll second the SOS pads. I know folks have raised concerns about
>> leaving pieces of steel behind but it just doesn't happen in my
>> experience. Even old heavily oxidized pieces clean up very quickly.
>> Rinse well and call it a day.
>> As an experiment recently, I tried a spray cleaner intended for aluminum
>> alloy wheels. It's a product available at most any auto parts store.
>> It contains some pretty harsh stuff: hydrofluoric acid, sulfuric acid,
>> etc. SOS pads are easier and provide better results.
>> On Sun, 2008-07-06 at 18:38 -0500, Larry WA9VRH wrote:
>>> Hi Jamie,
>>> I have had good luck with S.O.S. steel wool soap pads. I know people
>>> freaked out about the steel part but I never found that to be an issue.
>>> Cleaned up a couple of TA-33's and also a 40' Heights Aluminum towers.
>>> was a real mistake but once I started I had to finish as it looked so
>>> good I
>>> had no choice!
>>> 73 Larry WA9VRH
> TowerTalk mailing list
TowerTalk mailing list