[Top] [All Lists]

Re: [TowerTalk] To Shunt feed or Not to Shunt feed??

To: "" <>
Subject: Re: [TowerTalk] To Shunt feed or Not to Shunt feed??
From: "Jim Brown" <>
Date: Mon, 07 Jul 2008 08:11:43 -0700
List-post: <">>
On Mon, 7 Jul 2008 02:40:06 -0500, AD5VJ  Bob wrote:

>I am searching the index for the reflector as well as the internet on 
'shunt feeding' for my new 30' tower which is soon to have a
>10' mast on top of it.

>For 40 thru 160 meters

>Would I be wasting allot of time and effort if I started this (not so) 
little project without anything to measure impedance or an
>antenna analyzer to measure tuning? Also where does one get the 
capacitor necessary for the shunt feed?


Break down and buy the ON4UN book and the ARRL Antenna Book. Then study 
them. This is not new stuff, and you can learn it if you work at it. 

For capacitors -- it's easy to roll your own using transmitting coax 
(RG8, RG11). The ARRL Handbook and Antenna Book list the capacitance per 
foot of standard cables. Ballpark is 20-30 pF/ft, depending on type. 
These will handle enough voltage for a low impedance feedpoint. 

You can use NEC to get a handle on this. A version that nandles simple 
antennas comes with the ARRL Antenna Book, you can buy a version that is 
more powerful from W7EL for not a lot of money. 

You're going to want an antenna analyzer when you're working on this. If 
you haven't done so already, find and join a local ham club that includes 
some serious contesters and/or DXers. There's a good chance that these 
guys will have an analyzer you can borrow, AND they're likely to be 
willing to help you do the work!  I found that support from a club in 
Chicago, and again when I moved to CA two years ago. 

It's worth the time and cost to work with an analzyer -- you'll learn 
from it, because you can see on the analyzer what the textbooks are 
telling you. 

You'll need a LOT of top-loading to make that tower work on 160, but it 
can be done with an umbrella top-hat. You'll also need radials to make it 


Jim Brown K9YC 


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>