[Top] [All Lists]

[TowerTalk] rotor control cable and the bulkhead....?

Subject: [TowerTalk] rotor control cable and the bulkhead....?
Date: Mon, 07 Jul 2008 14:52:30 -0500
List-post: <">>
A Question...

how does one take the 7 or 8 wire cable thru a bulkhead and into the 
station?  I cannot see how a lightning strike hitting the mast or the 
yagi or beam or ??? on that mast is not going to travel down to ground 
using the tower, the coax, and the control cable.  I use an antenna 
switch box mounted on my Rohn with a piece of coax going thru the 
bulkhead thru the usual grounding connectors.  but cannot figure out 
how to ground the rotor control cable before it enters the shack.

73 de chas/k5dam

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>