[Top] [All Lists]

Re: [TowerTalk] rotor control cable and the bulkhead....?

Subject: Re: [TowerTalk] rotor control cable and the bulkhead....?
From: "Alfred Frugoli" <>
Date: Mon, 7 Jul 2008 21:27:59 -0400
List-post: <">>

K5FD also makes a 12 line surge suppressor that is also fused and has
filters for RFI.

After the surge suppressor, the lines could simply come through a grommet in
the bulkhead.

Good luck.

73 de Al, KE1FO

Visit my amateur radio contesting blog at

On Mon, Jul 7, 2008 at 3:52 PM, <> wrote:

> A Question...
> how does one take the 7 or 8 wire cable thru a bulkhead and into the
> station?  I cannot see how a lightning strike hitting the mast or the
> yagi or beam or ??? on that mast is not going to travel down to ground
> using the tower, the coax, and the control cable.  I use an antenna
> switch box mounted on my Rohn with a piece of coax going thru the
> bulkhead thru the usual grounding connectors.  but cannot figure out
> how to ground the rotor control cable before it enters the shack.
> thanks
> 73 de chas/k5dam
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>