[Top] [All Lists]

Re: [TowerTalk] What is..."Pointed Tower vs Flat"

To: <>
Subject: Re: [TowerTalk] What is..."Pointed Tower vs Flat"
From: "K5RC" <>
Date: Thu, 10 Jul 2008 13:55:06 -0700
List-post: <">>
This type of base is called pier and pin. It was popularized when AM
broadcast towers frequently used Rohn 25 as radiators. I have seen it used
on 1,500' commercial towers as well. The pier is a huge ceramic insulator
when it needs to be insulated.  I just put one in concrete this week in
preparation for moving my 110' 160 Vertical. I don't think they are popular
with hams because they are most safely erected with a crane until the first
guy level is secured and tensioned. 

Tom Taormina, K5RC
Virginia City NV

-----Original Message-----
[] On Behalf Of
Sent: Thursday, July 10, 2008 12:57 PM
Subject: Re: [TowerTalk] What is..."Pointed Tower vs Flat"

Most BIG commercial towers are the kind that come to point at the  bottom.  
This design helps to reduce torque stress on a tower (I  think).  Most ham 
towers are "flat" on the bottom.
The pointed ones use a "pin" of some sort and require guying of some sort  
from the first section.  The flat ones eventually require guying at some
 I prefer the flat type since it is easy to temporarily remove a set  of guy

wires to slide an antenna up the side of a tower.  One can not do  that with

the pointed type since it must be continuously guyed.
W2GD was recently injured by riding down 30 feet of tower that was
by a pin.  Accidents can and do happen on both types of  tower.

**************Get the scoop on last night's hottest shows and the live music

scene in your area - Check out!      

TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>