[Top] [All Lists]

Re: [TowerTalk] another stupid guywire question

To: "K5MLC (Mike)" <>
Subject: Re: [TowerTalk] another stupid guywire question
From: "Roger (K8RI)" <>
Date: Wed, 16 Jul 2008 18:27:22 -0400
List-post: <">>
K5MLC (Mike) wrote:
> Does anyone have any idea if 3/16 7x19 galvanized "aircraft cable" with a 
> burst strength of 4200lbs would be OK to use instead of EHS for guying a 
Although they may call this "aircraft cable" real aircraft cable is SS.  
More properly this is "wire rope"
It's great stuff to work with being very flexible, but that flexibility 
comes from lots of fine strands. I've never seen wire rope that didn't 
rust.  The galvanized just takes a bit longer to rust.  It's not nearly 
as strong for its size as EHS.

That said, I have used it on relatively small installations (not heavily 
loaded and easy to change)  I've also used it (appropriately sized) for 
temporary guys.  I would not use it on an installation like my 45G, or 
anything long term or heavily loaded.

As to the insulator spacing, I don't know as I use Phyllistran and 
haven't figured out the spacing in a long time.


Roger (K8RI - ARRL Life Member)
N833R (World's oldest Debonair)


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>