I found this place which might be a good source for materials
----- Original Message -----
From: "Richards" <email@example.com>
To: "Peter Voelpel" <firstname.lastname@example.org>
Sent: Sunday, 27 July, 2008 10:30 AM
Subject: Re: [TowerTalk] 40m OWA
> Why not get a specifications / instructions on the original design.
> It will have the measurements and parts descriptions you need.
> After you get the design down, spacing etc., I think
> DX Engineering and Penninger Radio both have parts that are
> nicely made and work well for making alum antennas.
> That is where I would start.
> ============= K8JHR ============
> Peter Voelpel wrote:
>> Is there anywhere around with a good design on a 48 foot boom which seems
>> be proven length for that beam?
> TowerTalk mailing list
TowerTalk mailing list